Zum Hauptinhalt springen

GGU-ATTERBERG: Preface

The GGU-ATTERBERG program allows evaluation and visualisation of tests to determine
consistency limits to DIN EN ISO 17892-12 or DIN EN ISO 14688-2. Liquid limit can be determined according to Casagrande or to the falling cone method. Select between DIN EN ISO 14688-2, DIN 18122, DIN 18196, ASTM and British Standard (BS 5930) for visualisation of the plasticity diagram.

The program includes convenient data input. The system is permanently displayed on the screen. Every change to the data is displayed on the screen, so that optimum control of the input data is guaranteed.

There are "?" and "Info"’ buttons in the dialog boxes for many technical and program-specific questions. Click on the "?" buttons or "Info" buttons to obtain the necessary information.

The graphic output supports the true type fonts provided by WINDOWS, so that an excellent layout is guaranteed. Colour output and numerous graphic formats (BMP, TIF, JPG etc.) are supported. PDF and DXF files can also be imported via the integrated Mini-CAD system (see "Mini-CAD" manual).

The program has been extensively tested. No errors have been found. Nevertheless, liability for completeness and correctness of the program and the manual, and for any damage resulting from incompleteness or incorrectness, cannot be accepted.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.