GGU-STABILITY: "Preferences" menu item

You can specify the method of display of certain stresses, etc. on the slip surfaces. You will see differing dialog boxes, depending on the method.

Janbu:
You can select a representation including the pore water pressure, the shear stress or the normal stress, etc. on the slip surfaces.

General wedge method and vertical slice method:
Among other things, you can specify which forces of the force polygon are displayed in the graphics. Using "Forces factor" you enter the scale factor for force representation. A value of 0.02 means, for example, that a force of 120 kN/m is represented with a length of 120 · 0.02 = 2.4 m (!). The forces can be equipped with arrow points, which can be colour-filled ("Colour" button) and may also be framed in the standard colour. The force arrows can be labelled (e.g. with the letter "C" only, for cohesion force). Additionally, the force value can be shown. Experiment with the preferences to discover your own ideal layout. Furthermore, the pressure line can be displayed when working with the vertical slice method.