GGU-GABION: Evaluation menu
General note
All the following information regarding the analysis results can be sent to the printer or to a file by going to the menu items "File/Print and export" or "File/Print output table". However, it is always more desirable to be able to check over the analysis results without wasting a lot of paper. The following menu items were included in the program for just this reason.
"Earth pressure redistribution" menu item
Here you are provided with information relating to earth pressure redistribution. This can be particularly interesting if you have calculated according to the EAB, in which case it is probably a good idea to have a copy of the EAB at hand.
"Main output summary" menu item
A message box appears containing the main system analysis parameters. This function can also be initialized pressing the [F6] function key.
You are also informed that double-clicking the left mouse button (after you have closed the info box) on any part of the graphics will cause the corresponding state variables to be shown on screen.
"Bearing capacity" menu item
Here you will obtain information in a message box related to the bearing capacity analysis. This function can also be initialized pressing the [F7] function key.
"Settlements" menu item
Here you will obtain the results of the settlement analysis displayed in a message box. CP means that the settlements are calculated for the characteristic points.. This function can also be initialized pressing the [F8] function key.
"Sliding safety" menu item
The calculated sliding safety is displayed in a message box.
"Static equilibrium (DIN 1055)" menu item
Using the partial safety factors to DIN 1054:2005 the static equilibrium to DIN 1055 is displayed in a message box.
"EQU analysis" menu item
If the partial safety factor concept to EC 7 is adopted all available information on the EQU analysis (limit state of loss of static equilibrium) is displayed in a message box.