GGU-STABILITY: "Sliding, overturning, bearing failure" menu item

Verification is in accordance with the notes in the "Theoretical principles" section. You will receive the following box when using geosynthetics or steel strips.

You will see the results in message boxes. After exiting the message boxes, the principal design values are displayed on the screen in the "Nail wall legend", if the corresponding check boxes are activated in the "Nail wall/Verifications/Safety" menu item.

This function can also be accessed by pressing the [F7] function key. This menu item cannot be selected if more than 1 nailed slope face exists in the system.